The Use of 3D Printing Technology for Manufacturing Metal Antennas in the 5G/IoT Context

Fecha

2021

Profesor Guía

Formato del documento

Articulo

ORCID Autor

Título de la revista

ISSN de la revista

Título del volumen

Editor

Sensors (Basel)

Ubicación

https://doi.org/10.3390/s21103321

ISBN

ISSN

1424-8220

item.page.issne

item.page.doiurl

Facultad

Departamento o Escuela

Determinador

Recolector

Especie

Nota general

Resumen

With the rise of 5G, Internet of Things (IoT), and networks operating in the mmWave frequencies, a huge growth of connected sensors will be a reality, and high gain antennas will be desired to compensate for the propagation issues, and with low cost, characteristics inherent to metallic radiating structures. 3D printing technology is a possible solution in this way, as it can print an object with high precision at a reduced cost. This paper presents different methods to fabricate typical metal antennas using 3D printing technology. These techniques were applied as an example to pyramidal horn antennas designed for a central frequency of 28 GHz. Two techniques were used to metallize a structure that was printed with polylactic acid (PLA), one with copper tape and other with a conductive spray-paint. A third method consists of printing an antenna completely using a conductive filament. All prototypes combine good results with low production cost. The antenna printed with the conductive filament achieved a better gain than the other structures and showed a larger bandwidth. The analysis recognizes the vast potential of these 3D-printed structures for IoT applications, as an alternative to producing conventional commercial antennas.

Descripción

Lugar de Publicación

Auspiciador

Palabras clave

3D PRINTING, 5G, IOT, SENSORS, HORN ANTENNAS, METAL ANTENNAS

Licencia

URL Licencia

Colecciones